Open Sections

Open Sections - M

Description

We produce standard open thin gauge cold rolled in M dimensions outlined below. Ability drilling Ø12, Ø14, Ø18, Ø22, where appropriate, the manufacturer and even the soles of the section.

Desired lengths

Features

EN 10346

Metal Sheets: DX51D:

  • Galvanized sheets (Z)
  • Aluzinc sheets (AZ)

or structural steel

xaraktiristika

Type Material Thickness (mm) Spread (mm) Weight (kg/ m) Center of Grav. Moment (cm4) Prior Center of Inerty (cm4)
JGx Ax0 JGy Ay0 Jp1 A10 Jp2 A20
M 175-15 1.5 330.0000 3.9 17.32000 00 219.88000 900 219.8800 900 17.32000 00
M 175-20 2.0 330.0000 5.2 23.36000 00 293.47000 900 293.4700 900 23.36000 00
M 175-25 2.5 330.0000 6.5 29.49000 00 367.52000 900 367.5200 900 29.49000 00
M 175-30 3.0 330.0000 7.8 35.70000 00 442.12000 900 442.1200 900 35.70000 00
M 205-15 1.5 360.0037 4.3 17.32410 00 320.88900 900 320.8890 900 17.32410 00
M 205-20 2.0 359.9967 5.7 23.36500 00 428.73200 900 428.7320 900 23.36500 00
M 205-25 2.5 359.9964 7.1 29.50130 00 537.31300 900 537.3130 900 29.50130 00
M 205-30 3.0 360.0018 8.5 35.70712 00 646.81580 900 646.8158 900 35.70712 00
M 235-15 1.5 390.0037 4.6 17.32560 00 446.10200 900 446.1020 900 17.32560 00
M 235-20 2.0 389.9967 6.1 23.36710 00 596.32100 900 596.3210 900 23.36710 00
M 235-25 2.5 389.9964 7.7 29.50530 00 747.68900 900 747.6890 900 29.50530 00
M 235-30 3.0 390.0018 9.2 35.71442 00 900.44670 900 900.4467 900 35.71442 00

 

Dimensional Tolerances EN 10143
Width (w)
+6mm
Thickness (t)

1.20<t≤1.60mm ±0.13mm

1.60<t≤2.00mm ±0.15mm
2.00<t≤2.50mm ±0.17mm
2.50<t≤3.00mm ±0.20mm

Length (L)

L<2000mm +6mm
L≥2000mm +0.3% of length

Flatness t<0.7mm 15mm
0.7<t≤1.60mm 13mm
Orthogonality deviation <1% of width (w)

Related Products